Description
Product Highlights
Features
Swing Gate-Mount Loaded Enclosure
-
Extreme Bass: Push your Jeep's bass to the limit. Experience clean, articulate, goose bump-inducing bass; jam-packed with every musical detail
-
Space-Saving Fit: Engineered to overcome the lack of space hurdle where space is a premium, without compromising power and sound quality
- Weather-Resistant: Designed to withstand harsh outside elements including water, dirt, dust, and debris
700W Monoblock Amplifier
-
Digital Class-D Mono Block Amplifier: Perfect for powering your car audio subwoofer system without sacrificing sound quality or performance.
-
Small Footprint and Sturdy Design: Experience total tonal control with our precision metal potentiometer, built to the highest standards for lasting reliability.
-
Robust Unregulated Power Supplies: Our power supply circuitry utilizes advanced pulse width modulator integrated circuits designed to provide superior performance and unmatched efficiency. Remote Bass Controller Included: Superior audio control from the comfort of your driver's seat. Our flush-mount knob makes installation easy, allowing you to effortlessly adjust bass levels with just one twist.
-
Designed with Advanced HEXFET® Power MOSFET: Harness the power of innovative engineering and cutting-edge technology with our advanced HEXFET® Power MOSFET. Boasting reduced on-resistance, faster switching speeds, and unparalleled reliability.
-
500V High Current Impulse voltage capacitor: Special Class X2 aluminum zinc high-frequency capacitor with low loss AC peak surge over-current ability to protect the MOSFET.
-
Direct Insert Power and Speaker Terminals: Decreased resistance for higher power transfer and efficiency.
Description
Everything You need to Add Bass to Your Wrangler JL Unlimited
Upgrade your Jeep Wrangler's audio system with our all-in-one subwoofer solution. The AudioControl 12" 400 Watt subwoofer enclosure is meticulously engineered to match your vehicle's tailgate perfectly, providing a seamless and effortless method for incorporating a high-performance subwoofer into your audio setup. Built with durability in mind, the subwoofer enclosure ingeniously utilizes the tailgate for mounting, optimizing space utilization while ensuring sturdiness and protection against harsh weather conditions.
The team at AudioControl has designed a subwoofer specifically for this enclosure, delivering immersive and precise bass that's guaranteed to elevate your audio experience. Additionally, we've included the Stinger Audio MT700.1 Monoblock Amplifier - an energy-efficient powerhouse that pumps out 700-Watts of RMS power at 1 ohm. Built using superior quality components, including MOSFET power supply, high-grade capacitors, advanced transformers, and high-quality inductors, this Class D car audio amplifier ensures maximum current flow, allowing for reliable performance with every heart-pounding beat.
We've also included a Jeep Wrangler JL Unlimited-specific amplifier mounting bracket that makes it easy to mount select Audio Control, Stinger Audio, or other amplifiers under your driver's seat. Additionally, our Complete Amplifier 4GA Wiring Kit is designed to withstand even the harshest outside elements, including water, dirt, dust, and debris.
Transform your Jeep Wrangler's audio system today and experience unparalleled sound quality, reliability, and convenience. With our all-in-one subwoofer solution, you can take your driving experience to the next level and enjoy the music like never before.
WHY THIS WRANGLER JL UNLIMITED SUBWOOFER UPGRADE
Designed for your JLU to add bass but not bulk. Your swing gate-mount loaded and closure and amplifier are designed specifically for your JLU, giving you the music experience you deserve without giving up space.
What's In The Box
-
Swing gate-mount 12" 400 watt subwoofer loaded enclosure for Jeep Wrangler JLU (TXJWB12)
-
700 Watt Class D Monoblock Car Audio Amplifier (MT-700.1)
-
Jeep Wrangler 4GA wiring kit w/ 12ft 2 channel RCA cable (STXKJW4)
-
Jeep Wrangler JL Unlimited amplifier mounting system (JLUAMPBRKTD)
-
15ft of 14GA speaker wire
Specifications
Loaded Subwoofer Enclosure Specifications
| Number of Channels: | 1 |
| 4Ω: CH 1 | 350W x 1 |
| 2Ω: CH 1 | 520W x 1 |
| 1Ω: CH 1 | 800W x 1 |
| Total RMS Power (Sum of rated power): | 800W |
| Bridgeable: | NO |
| Crossover Mode: | LP |
| CH 1 | 50Hz - 250Hz @ 12dB / Oct Linkwitz Riley |
| Subsonic | 10Hz - 55Hz @ 12dB / Oct Linkwitz Riley |
| Input Channels: | 2CH L/R |
| Input Mode: | Switchable Unbalanced / Balanced |
| Input Sensitivity: | .2v - 5v Unbalanced RCA Low-Level .5v - 10v Balanced RCA Hi-Level |
| Processing: | Bass Boost 0 - +18dB @45hz Variable Phase 0 - 180 Degrees |
| Output Channels: | Pass Through from Input Signal |
| Signal to Noise (@ CEA Standard): | >90dB |
| Frequency Response: Full Range | CH 1 15Hz - 250Hz |
| Topology Class: | D |
| Heatsink Type: | Extruded Aluminum |
| Cooling Type: | Radiation |
| Operating Voltage: | 8V to 16V |
| Switchable Auto-Turn On: | No |
| Power Supply Type: | Unregulated |
| Power Terminals: | 4 Gauge |
| Speaker Terminal: | 10 Gauge |
| On-Board Fusing: | 3 x 30A ATC |
| Recommended Inline Fuse: | 80A |
| Dimensions (L x W x H): | 10.16” x 5.91” x 1.91” - 258mm x 150mm x 48.5mm |
Monoblock Amplifier Specifications
|
Number of Channels: |
1 |
|
1Ω: |
700 Watts x 1 Channel |
|
2Ω: |
500 Watts x 1 Channel |
|
4Ω |
300 Watts x 1 Channel |
|
Bridged RMS Rating / 2Ω Minimum |
1200W x 1 |
|
Signal to Noise (@ CEA Standard) |
-93db |
|
Input Sensitivity 0.2-6v |
0.2-6v |
|
Gain |
0.2v - 6v |
|
Crossover Control, Linkwitz-Riley |
SUB 0Hz - 50Hz (Subsonic) LP 40Hz - 180Hz @ 12dB/Oct |
|
Bass-Boost Frequency Range |
30-80 Hz |
|
Bass-Boost Q |
0-12dB |
|
Frequency Response (+- 1dB) |
10Hz - 180Hz |
|
Efficiency (Average) |
85% |
|
Topology Class: |
Class D |
|
Remote Bass Control |
Included |
|
Operating Voltage |
9V to 16V |
|
Power Terminals: |
4 Gauge |
|
Speaker Terminal: |
8 Gauge |
|
Recommended External Fusing |
80A |
HEXFET® is a registered trademarks of International Rectifier Corporation.
4GA Wiring Kit Specifications
| Vehicle Fitment | Jeep Wrangler Unlimited 4-Door (2007-2022) Jeep Gladiator JT (2020-2022) |
| Placement | Driver's Seat |
| High Current OFC Copper | 4 Gauge |
| Directional Twisted-Pair RCA Cable | 2 channel 4000 series |
| Element-ready jacket for extreme environments |
| Pre-cut, terminated, and loomed wire |
| Expandable X-Link fuse holder with custom mounting bracket |
| Wire ferrules, remote turn-on wire, and hardware pack included |
Warranty Information
We have a 30-day easy return policy for all purchases.
We provide a shipping label for defective products upon your return request at no cost. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.
Stinger products are warrantied against defects in materials One (1) Year from purchase date. Stinger will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.
Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.
Note: Products purchased from unauthorized dealers are not covered under warranty.
Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.