Description
Product Highlights
Features
MT-1000.1 Monoblock Amplifier
-
Powerful Performance: Class-D Mono Block amplifier delivers efficient, high-quality power for car subwoofer systems.
-
Durable & Precise Sound Control: Features a sturdy metal potentiometer for reliable, smooth tonal adjustments.
-
Efficient Power Supply Design: Unregulated power supplies with advanced circuitry ensure optimal performance.
-
Advanced HEXFET® MOSFET Technology: Enhances reliability, reduces resistance, and supports faster switching.
- Enhanced Audio Control: Remote bass controller provides in-car, on-the-fly bass level adjustments.
DC Series 1,000 Watt 10" Subwoofer
-
Reinforced Durability: CFL³ Technology voice coil and D.C.T. dual cap design enhance structural rigidity, prolonging subwoofer life with reduced distortion.
-
High-Performance Woofer Design: Fiber matrix cone, MLB collar, and Dual VC design strengthen cone rigidity for high-pressure handling and clear bass.
-
Maximum Excursion for Deep Bass: Linear surround technology and long-throw spider suspension deliver hard-hitting, immersive bass.
-
Thermally Efficient Motor: Vented motor with FEA-optimized high-efficiency design for reduced compression and extended low-frequency response.
- Premium Frame and Assembly: Cast aluminum frame, C.T.P. coupled top plate, and bent-edge frame minimize resonance for accurate, distortion-free sound.
4GA 1200 Watt Amplifier Wiring Kit
-
Full Copper Construction: This copper wire is able to efficiently transmit electricity, ensuring high performance and reliability.
-
Quality Twisted Pair Interconnects: Designed to provide reliable overcurrent protection, ensuring your devices and equipment remain safe from damage caused by power surges or short circuits.
- Professional-Grade Components: Carefully designed interconnects to provide exceptional signal transfer, eliminating any unwanted noise or interference.
Description
The Stinger Audio MT-1000.1 Amplifier Bundle delivers high-impact, precise audio for car enthusiasts seeking powerful bass and premium sound quality. The MT-1000.1 Class-D Monoblock Amplifier ensures efficient, high-quality power with HEXFET® MOSFET technology for reliability and fast response, plus an in-car remote bass controller for easy adjustments. Paired with the DC Series 1,000 Watt 10" Subwoofer, this bundle offers deep, distortion-free bass thanks to its CFL³ voice coil, dual cap design, and advanced woofer components that enhance rigidity and durability. The 4GA 1200 Watt Amplifier Wiring Kit completes the setup with full copper construction and professional-grade components for optimal performance and protection.
What's in the Box
- 1000 Watt Class D Car Monoblock Amplifier
- Remote Bass Control and Cable
- Remote Bass Control Mounting Bracket and Screws
- Amplifier User Guide
- Amplifier Troubleshoot Guide
- 10" DC Series 2-OHM Subwoofer
- Subwoofer User Guide
- Complete Amp Wiring Kit
Specifications
MT-1000.1 Monoblock Amplifier Specifications
| Model Number | MT-700.1 |
|
Number of Channels: |
1 |
|
1Ω |
700 Watts x 1 Channel |
|
2Ω |
500 Watts x 1 Channel |
|
4Ω |
300 Watts x 1 Channel |
|
Bridged RMS Rating / 2Ω Minimum |
1200W x 1 |
| Signal to Noise (@ CEA Standard) |
-93db |
|
Input Sensitivity 0.2-6v |
0.2-6v |
|
Gain |
0.2v - 6v |
|
Crossover Control, Linkwitz-Riley |
SUB 0Hz - 50Hz (Subsonic) |
|
Bass-Boost Frequency Range |
30-80 Hz |
|
Bass-Boost Q |
0-12dB |
|
Frequency Response (+- 1dB) |
10Hz - 180Hz |
|
Efficiency (Average) |
85% |
| Topology Class |
Class D |
| Remote Bass Control | Included |
| Operating Voltage | 9V to 16V |
| Power Terminals | 4 Gauge |
| Speaker Terminal | 8 Gauge |
| Recommended External Fusing | 80A |
HEXFET® is a registered trademarks of International Rectifier Corporation.
DC Series 1,000 Watt 10" Subwoofer Specifications
| Model Number | DC210D2 |
| Nominal Impedance (Z) | 1.8 ohms |
| DC Resistance (Re) | 3.6 ohms |
| Resonance Frequency (Fs) | 29.4605 Hz |
| Piston Area (Sd) | 0.0314 m2 |
| Force Factor (BL) | 22.8048 T.m |
| Mechanical Q Factor (Qms) | 7.8504 |
| Electrical Q Factor (Qes) | 0.3561 |
| Total Q Factor (Qts) | 0.3407 |
|
Sensitivity 1W/M (SPL) |
82.1895 |
|
Mechanical Compliance (Cms) |
0.1050 mm/N |
|
Moving Mass (Mms) |
277.9171 g |
|
Linear Excursion (Xmax) |
16 mm |
|
Volume Acoustic |
14.4725 Ltr |
|
Compliance (Vas) |
0.511 cu ft |
|
Reference Efficiency (NO.) |
0.10% |
| Nominal Power (Pe) |
1000 Watts |
| Peak Power |
1500 Watts |
| Frequency Response |
20-200 Hz |
| Voice Coil Diameter |
3 in / 76.2 mm |
| Displacement | 0.0889cu ft/ 2.517Ltr |
Stinger Wiring Kits Specifications
| Model Number | SS1200XS |
| Size | 4 GA |
| Power | 1200 Watt |
| Translucent Blue Power Wire | 17FT |
| Translucent Silver Ground Wire | 3FT |
| Translucent Blue Twisted Pair RCA Interconnect |
17FT |
| Blue Remote Turn-on Wire | 16FT |
|
Translucent Speaker Wire |
20FT |
Warranty Information
We have a 30-day easy return policy for all purchases.
We provide a shipping label for defective products upon your return request at no cost. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.
Stinger products are warrantied against defects in materials One (1) Year from purchase date. Stinger will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.
Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.
Note: Products purchased from unauthorized dealers are not covered under warranty.
Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.