Description
Product Highlights
Features
MT-1500.1 Monoblock Amplifier
-
Powerful Performance: Class-D Mono Block amplifier delivers efficient, high-quality power for car subwoofer systems.
-
Durable & Precise Sound Control: Features a sturdy metal potentiometer for reliable, smooth tonal adjustments.
-
Efficient Power Supply Design: Unregulated power supplies with advanced circuitry ensure optimal performance.
-
Advanced HEXFET® MOSFET Technology: Enhances reliability, reduces resistance, and supports faster switching.
- Enhanced Audio Control: Remote bass controller provides in-car, on-the-fly bass level adjustments.
DC Series 1,000 Watt 12" Subwoofer
-
Reinforced Durability: CFL³ Technology voice coil and D.C.T. dual cap design enhance structural rigidity, prolonging subwoofer life with reduced distortion.
-
High-Performance Woofer Design: Fiber matrix cone, MLB collar, and Dual VC design strengthen cone rigidity for high-pressure handling and clear bass.
-
Maximum Excursion for Deep Bass: Linear surround technology and long-throw spider suspension deliver hard-hitting, immersive bass.
-
Thermally Efficient Motor: Vented motor with FEA-optimized high-efficiency design for reduced compression and extended low-frequency response.
- Premium Frame and Assembly: Cast aluminum frame, C.T.P. coupled top plate, and bent-edge frame minimize resonance for accurate, distortion-free sound.
4GA 1500 Watt Amplifier Wiring Kit
-
Audiophile-Grade Sound Quality: 4000 Series 4-channel interconnects with 100% oxygen-free copper to provide pure, uninterrupted power transfer for enhanced audio clarity.
-
Premium Durability and Safety: Tinned conductors resist corrosion, while the Mini-ANL (MIDI) style fuse holder provides maximum power delivery and protection.
- Flexible, Reliable Design: Tru-Spec hyper-twist matte finish wire construction and pre-terminated power connections offer superior flexibility and consistent performance.
Description
The Stinger Audio MT-1500.1 Amplifier Bundle delivers high-impact, precise audio for enthusiasts seeking powerful bass and premium sound quality. The MT-1500.1 Class-D Monoblock Amplifier ensures efficient, high-quality power with HEXFET® MOSFET technology for reliability and fast response, plus an in-car remote bass controller for easy adjustments. Paired with the DC Series 1,000 Watt 12" Subwoofer, this bundle offers deep, distortion-free bass thanks to its CFL³ voice coil, dual cap design, and advanced woofer components that enhance rigidity and durability. The 4GA 1500 Watt Amplifier Wiring Kit completes the setup with full copper construction and professional-grade components for optimal performance and protection.
What's in the Box
- 1500 Watt Class D Car Monoblock Amplifier
- Remote Bass Control and Cable
- Remote Bass Control Mounting Bracket and Screws
- Amplifier User Guide
- Amplifier Troubleshoot Guide
- 12" DC Series 2-OHM Subwoofer
- Subwoofer User Guide
- Complete Amp Wiring Kit
Specifications
MT-1500.1 Monoblock Amplifier Specifications
Model Number | MT-1500.1 |
Number of Channels: |
1 |
1Ω |
1500 Watts x 1 Channel |
2Ω |
1000 Watts x 1 Channel |
4Ω |
550 Watts x 1 Channel |
Bridged RMS Rating / 2Ω Minimum |
2800W x 1 |
Signal to Noise (@ CEA Standard) |
-93db |
Input Sensitivity 0.2-6v |
0.2-6v |
Gain |
0.2v - 6v |
Crossover Control, Linkwitz-Riley |
SUB 0Hz - 50Hz (Subsonic) |
Bass-Boost Frequency Range |
30-80 Hz |
Bass-Boost Q |
0-12dB |
Frequency Response (+- 1dB) |
10Hz - 180Hz |
Efficiency (Average) |
82% |
Topology Class |
Class D |
Remote Bass Control | Included |
Operating Voltage | 9V to 16V |
Power Terminals | 4 Gauge |
Speaker Terminal | 8 Gauge |
Recommended External Fusing | 150A |
HEXFET® is a registered trademarks of International Rectifier Corporation.
DC Series 1,000 Watt 10" Subwoofer Specifications
Model Number | DC212D2 |
Nominal Impedance (Z) | 1.8 ohms |
DC Resistance (Re) | 3.6 ohms |
Resonance Frequency (Fs) | 36.2380 Hz |
Piston Area (Sd) | 0.0471 m2 |
Force Factor (BL) | 21.7424 T.m |
Mechanical Q Factor (Qms) | 8.9256 |
Electrical Q Factor (Qes) | 0.4997 |
Total Q Factor (Qts) | 0.4732 |
Sensitivity 1W/M (SPL) |
84.9847 |
Mechanical Compliance (Cms) |
0.0669 mm/N |
Moving Mass (Mms) |
288.2100 g |
Linear Excursion (Xmax) |
16 mm |
Volume Acoustic |
20.7705 Ltr |
Compliance (Vas) |
0.734 cu ft |
Reference Efficiency (NO.) |
0.19% |
Nominal Power (Pe) |
1000 Watts |
Peak Power |
1500 Watts |
Frequency Response |
20-200 Hz |
Voice Coil Diameter |
3 in / 76.2 mm |
Displacement | 0.1083 cu ft/ 3.066 Ltr |
Stinger Wiring Kits Specifications
Model Number |
SK4641 |
Size | 4 GA |
Power | 1200 Watt |
Matte Red Hyper-Twist Power Wire | 18FT |
Matte Black Hyper-Twist Ground Wire | 3FT |
4000 Series 2-Channel Audio Interconnect |
17FT |
Blue Remote Turn-on Wire | 17FT |
Fuse Holder |
SPD5801 mini-ANL (MIDI) |
Shoc-Krome MIDI Fuse | 150 Amp |
Crimp Ring Terminals (Pre-Installed) | 4GA |
Blue Butt Connector | 16GA |
Snap-In Protective Firewall Grommet | 4GA |
Wire Ties | (10) 7"/17.8cm |
Warranty Information
We have a 30-day easy return policy for all purchases.
We provide a shipping label for defective products upon your return request at no cost. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.
Stinger products are warrantied against defects in materials One (1) Year from purchase date. Stinger will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.
Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.
Note: Products purchased from unauthorized dealers are not covered under warranty.
Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.