Description
Product Highlights
Features
EPIC2000 Monoblock Amplifier
-
Powerful, Compact Design: Digital Class-D amplifier delivers impressive power in a space-saving form.
-
Peak Performance Ready: Supports stable power output down to a 1-ohm load.
-
Effortless Integration with The Epicenter: Epicenter Link simplifies connections for power and remote control in one.
-
Easy Sound Control: ACR-E Remote Control knob provides convenient, in-car adjustments.
- Enhanced Protection and Connections: Multiple safety modes and Hex screw direct wire terminals ensure secure, reliable performance.
Spike Series 12" Subwoofer
-
Deep, Powerful Bass: Raised and high excursion design delivers immersive low-frequency response and greater output.
-
Improved Bass Response: Fiber matrix composition with mica coating enhances overall bass performance.
-
Heat Management: 3-layer high-temp voice coil ensures even heat distribution for consistent performance.
-
Controlled Sound: Dual damping system and dust cap minimize compression and control cone behavior for accurate bass.
- Durable & Protected: Heavy-duty motor withstands high-power amps, and the removable grille provides physical protection.
1/0GA 2400 Watt Amplifier Wiring Kit
-
Full Copper Construction: This copper wire is able to efficiently transmit electricity, ensuring high performance and reliability.
-
Quality Twisted Pair Interconnects: Designed to provide reliable overcurrent protection, ensuring your devices and equipment remain safe from damage caused by power surges or short circuits.
- Professional-Grade Components: Carefully designed interconnects to provide exceptional signal transfer, eliminating any unwanted noise or interference.
Description
The Stinger Audio EPIC2000 Amplifier Bundle is engineered for enthusiasts who crave powerful, precise bass in a space-saving setup. Featuring the EPIC2000 2000 Watt Monoblock Amplifier, this bundle provides Class-D efficiency with peak stability down to 1 ohm and easy adjustability with the included bass knob. Paired with two Spike Series 12" Subwoofers, the bundle delivers deep, accurate bass using a high-excursion design, fiber matrix cone, and heat-managed 3-layer voice coil for consistent, controlled sound. Completing the package, the 1/0GA 2400 Watt Amplifier Wiring Kit includes audiophile-grade, oxygen-free copper construction and corrosion-resistant components for clean, reliable power transfer and high-quality sound performance.
What's in the Box
- 2000 Watt Monoblock Amplifier
- Wrench
- Screws
- ACR-E Remote Level Control and Cable
- The Epicenter Link (1m Harness)
- Amplifier User Guide
- (2) 12" 500 Watt 4-OHM Spike Series Subwoofers
-
Subwoofer User Guide
- Complete Amp Wiring Kit
Specifications
EPIC2000 Monoblock Amplifier Specifications
Model Number | EPIC2000 |
Line-Level Inputs | 500mV – 6V RMS |
Continuous Power (RMS) @ 14.4V |
1 x 800 Watts @ 4 ohms |
Remote Level Control | Included |
Frequency Response (+/- 1 dB) | 10 Hz – 190 Hz |
S/N Ratio |
92.9 dBa, Ref 800 Watts @ 4 ohms |
Power / Ground Wire Gauge | 0/1 AWG |
Recommended Fuse Rating | 200 Amps |
Low Pass Filter | 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz |
Subsonic Filter | 12 dB/octave Linkwitz-Riley, Off to 50 Hz |
EPIC Boost (Frequency Center) | 30 Hz to 80 Hz, Gain: 0 to 12 dB |
Speaker Terminal Wire Gauge | 4 AWG |
Strapable | Yes |
Epicenter Link | Yes |
Dimensions |
6.1″ W x 12.56″ L x 2.01″ H |
Spike Series 12" Subwoofer Specifications
Model Number | SPK-12S4 |
Nominal Impedance (Z) |
4 ohms |
DC Resistance (Re) |
3.2 ohms |
Resonance Frequency (Fs) | 40.4239 Hz |
Piston Area (Sd) | 0.0491 m2 |
Force Factor (BL) | 13.7286 T.m |
Mechanical Q Factor (Qms) | 6.5823 |
Electrical Q Factor (Qes) | 0.8207 |
Total Q Factor (Qts) | 0.7297 |
Sensitivity 1W/M (SPL) | 85.4588 |
Mechanical Comp (Cms) | 0.0815 mm/N |
Moving Mass (Mms) | 190.3035 g |
Linear Excursion (Xmax) | 14 mm |
Volume Acoustic Comp (Vas) | 27.4067 Ltr/ 0.9678 cu ft |
Reference Efficiency (NO.) | 0.2118% RMS |
Power (Pe) | 500 Watts |
Frequency Response | 20-200 Hz |
Voice Coil Diameter | 2.5 in/63.5 mm |
Displacement | 0.0885 cu ft/ 2.506 Ltr |
Overall Dimensions |
12.76in/ 324mm |
Cut Out Diameter | 11.125 in/ 282mm |
Mounting Depth | 6.14 in/ 156 mm |
Mounting Height (w/o Grille) | 0.68in / 17.3mm |
Mounting Height (w/ Grille) | 1.437in / 36.5mm |
Motor Diameter (w/ Cover) | 6.41in / 163mm |
Stinger Wiring Kits Specifications
Model Number | SS2400XS |
Size | 0 GA |
Power | 2400 Watt |
Translucent Blue Power Wire | 17FT |
Translucent Silver Ground Wire | 3FT |
Translucent Blue Twisted Pair RCA Interconnect |
17FT |
Blue Remote Turn-on Wire | 16FT |
ANL Fuse |
250A |
Warranty Information
We have a 30-day easy return policy for all purchases.
We provide a shipping label for defective products upon your return request at no cost. Non-defective products will not receive a shipping label and the consumer will be responsible for all shipping costs.
Stinger products are warrantied against defects in materials One (1) Year from purchase date. Stinger will, at its discretion, replace any products that exhibit defects in materials and/or workmanship during the warranty period. Assessments of defective parts are performed before replacements are shipped or refunds are released.
Please hold on to your order confirmation! All warranty service requires original sales receipt documentation with Order Number. The warranty only applies to the original purchaser.
Note: Products purchased from unauthorized dealers are not covered under warranty.
Warranty Limitations
Units found to have physical or liquid damage caused by use abuse or improper installation may be void of warranty.